Using Other Types Of Audio/Video Output - Pioneer DVR-520H Operating Instructions Manual

Connecting up

Using other types of audio/video output

If you can't use the SCART AV connector to connect your TV to this recorder, there are standard audio/video output
jacks, as well as an S-video output.
Using the supplied audio/video cable
AUDIO
INPUT
VIDEO
INPUT
TV
2 1
ANTENNA
OUT IN
R L
AUDIO
VIDEO S-VIDEO AV 2/AUTO START REC
AV 1 (RGB) - TV
OUTPUT (INPUT 1/DECODER)
1 Connect the VIDEO OUTPUT jack to a video input
on your TV.
Use the yellow jack of the supplied audio/video cable for
the video connection.
2 Connect the AUDIO OUTPUT jacks to the
corresponding audio inputs on your TV.
Use the red and white jacks of the supplied audio/video
cable for the audio connection. Make sure you match up
the left and right outputs with their corresponding inputs
for correct stereo sound.
AC IN
IN OPTICAL
CONTROL DIGITAL OUT
Using the S-video output
AUDIO
INPUT
2
TV
ANTENNA
OUT IN
R L
AUDIO
VIDEO S-VIDEO
AV 1 (RGB) - TV
OUTPUT
1 Use an S-video cable (not supplied) to connect
the S-VIDEO OUTPUT to an S-video input on your TV,
monitor (or other equipment).
2 Connect the AUDIO OUTPUT jacks to the
corresponding audio inputs on your TV.
You can use the supplied audio/video cable, leaving the
yellow video plug disconnected. Make sure you match up
the left and right outputs with their corresponding inputs
for correct stereo sound.
S-VIDEO
INPUT
1
AC IN
IN OPTICAL
AV 2/AUTO START REC
(INPUT 1/DECODER) CONTROL DIGITAL OUT
02
15
En