Call Scheduling Screen; Call Scheduling Screen; Call Retry Strategy; Primary Call Retry Count - Honeywell CNI2 Operating And Installation Manual

CNI2 Operating and Installation Guide

CALL SCHEDULING SCREEN

Call Scheduling Screen

Call Retry Strategy

If the CNI2 attempts a call and the call is unsuccessful for any reason, it can try the call again at
a later time. It can also be told to retry the call to a different computer or not retry the call at all.
If many CNI2s are installed and programmed to call the same system around the same time
then it is likely that a few of the calls may fail due to network congestion, or the data collection
system may not be configured to accept that many calls at once. To reduce the chance of
retries it is best to spread the call schedule out among all of the units.
An overly-aggressive retry strategy will reduce battery life.

Primary Call Retry Count

This is the number of times that the CNI2 will try to repeat a call at the Primary Call Retry
Interval rate, which is a value between 1 and 255 minutes. Once a call is successful the retry
strategy is cancelled. But if the Primary Retry Count is exhausted then subsequent calls will be
attempted at the Secondary Call Retry Interval.
If the Primary Retry Count value is specified as 0 then no primary retry attempts are made and
the CNI2 will go immediately to the Secondary interval.
94