Configuring The Cni2'S Pulse-Counting Inputs; Device Configuration Screen - Honeywell CNI2 Operating And Installation Manual

CNI2 Operating and Installation Guide

CONFIGURING THE CNI2'S PULSE-COUNTING INPUTS

Now select the Input Description tab. The following screen will appear.

Device Configuration Screen

It is important to select the correct number of data (pulse-counting) inputs and the time interval
for counting pulse data, both of which were programmed into the CNI2.
As mentioned earlier, a CNI2 can use its inputs for either pulse-counting or alarm sensing. If a
combination is used then DC-2009 must be told how many channels are being used for pulse-
counting.
In DC-2009 you must match the number of pulse-counting inputs to that of the CNI2's. This is
done by deleting inputs from the screen. However you can only delete inputs starting at the last
input and working your way up.
128