Turn On/Off Beep; Autohold And Autosave Modes - Fluke BT520 User Manual

BT520
Users Manual
4. Use  and  to highlight the field to be edited. Use  and L to increase or decrease
value.
5. When the correct date and time is set, push the OK softkey.
6. Push the Back softkey to return to normal operation.
To change the date format:
1. Push  to open the Setup menu.
2. Use L and  to highlight General and push the Select softkey.
Date/time is selected by default.
3. Push the Format softkey to open the Date format menu.
4. Use L and  to highlight the correct date format.
5. Push the Confirm softkey.
6. Push the Back softkey to return to normal operation.

Turn On/Off Beep

To turn on or turn off beep:
1. Push  to open the Setup menu.
2. Use L to highlight Beep, and push the Select softkey.
3. Use  and L to highlight Off or On, and push the Confirm softkey.
4. Push the Back softkey to return to normal operation.

AutoHold and AutoSave Modes

AutoHold and AutoSave are available only for the Battery Internal
Resistance and Discharge functions.
When AutoHold is turned on, the "heart beat" icon shows on the display. The Product
will hold the reading when it remains stable for 1 second. After a successful AutoHold,
the HOLD icon shows on the display. The auto-held reading will not be released even
after the user disconnects the test leads from the test object.
In AutoSave mode, the AutoSave icon shows on the display. The auto-held reading is
automatically saved to the internal memory.
2-4
Note