BT520
Users Manual
Replace the Fuse
To prevent possible electrical shock, fire, or personal injury:
•
•
To replace the fuse:
1. Make sure the Product is off and any test leads are disconnected.
2. Use a screwdriver to loosen the captive screw on the fuse cover at the upper end of
the Product.
3. Install the new fuse.
4. Reinstall the fuse cover.
5. Tighten the fuse cover screw.
See Figure 7-2.
1
7-4
Use only specified replacement fuses.
Replace a blown fuse with exact replacement only for
continued protection against arc flash.
Figure 7-2. Replace the Fuse
Warning
2
hsz006.eps