Connect The Probe To The Product; Set The Audio; Turn On/Off Power - Fluke BT520 User Manual

BT520
Users Manual
Item No.









Connect the Probe to the Product

Before the interactive test probe is used, connect the probe to the Product.

Set the Audio

The interactive test probe has a speaker that can play audio reminders.
To set the audio:
1. Push  on the Product to open the Setup screen.
2. Use L to highlight Handle, and push the Select softkey.
Audio is already highlighted.
3. Push the Select softkey.
4. Use  and L to highlight Disable, Threshold result, Battery number, or Both.
5. Push the Confirm softkey.
6. Push the Back softkey to return to the Setup screen.

Turn On/Off Power

The interactive test probe is powered by the Product.
When the interactive test probe is connected to the Product, it automatically turns on.
Push the power key below the probe display to turn on or turn off the power of the
interactive test probe.
To conserve product battery power, push the power key below the handle display.
4-2
Table 4-1. Elements of the Interactive Test Probe
Name
Shows information such as measurement readings and battery
Display
ID.
Indicates the status of a measurement. Green means Pass;
LED indicator
orange means Warning; red means Fail.
Save button Manually saves a measurement reading.
Backlight key Turns on or turns off the backlight for the interactive test probe.
Power key Turns on or turns off the interactive test probe.
Plays audio reminders (PASS, WARNING, FAIL, and battery
Speaker
number) when enabled.
Connects the interactive test probe to the measured unit. The
Probe tip
probe tips can be replaced.
Hold the handle behind the tactile barrier to prevent personal
Tactile barrier
injury.
Function