How To Move The Incline Trainer - NordicTrack NTL14215.1 User Manual

HOW TO MOVE THE INCLINE TRAINER

Before moving the incline trainer, insert the key
into the console, adjust the incline level to zero,
remove the key, and unplug the power cord.
Due to the size and weight of the incline trainer,
moving it requires two or three persons. Hold the
uprights firmly near the console. Tip the incline trainer
back until it rolls freely on the wheels. CAUTION: To
decrease the possibility of injury or of damage to
the incline trainer, do not lift the incline trainer by
the plastic belly pan. Do not pull on the console.
Console
Upright
Wheel
Carefully roll the incline trainer on the wheels to the
desired location, and then lower it to the level position.
CAUTION: To reduce the risk of injury, use extreme
caution while moving the incline trainer. Do not
attempt to move the incline trainer over uneven
surfaces.
Make sure that the incline trainer rests firmly on the
floor. If the incline trainer rocks even slightly, turn the
Leveling Feet (77) as needed until the rocking motion
is eliminated.
Belly
Pan
77
24