Advanced Feature Menu Setup; Displaying The Menu Screen; Clearing The Menu Screen - Pioneer DVD-V7200 Operating Instructions Manual

ADVANCED FEATURE MENU SETUP

Advanced feature menu setting is done with the remote control unit. Setup can be done either when a disc is playing, or when the
player is stopped.

DISPLAYING THE MENU SCREEN

Press and hold the
screen appears (for about 1.5 sec.).
÷ The menu screen is displayed.
Menu to the 1/2 screen
MENU
WEEKLY TIMER
POWER ON START
TITLE PLAY MODE
REPEAT MODE
BAUD RATE
TRAY LOCK
BLACKBOARD LOCK
STILL MODE
D.R.COMP
« »
Menu to the 2/2 screen
MENU
MARK FRAME SQUELCH
SQUELCH DUR SEARCH
SYNC OUT (DURING SQ)
STACK MODE OSD
Pressing the remote control unit's
will move the ‰ (pointer) on the left side of the setting item
up or down. When the menu page 1/2 screen has a ‰ (pointer)
at the very bottom part of it, pressing the remote control's
button again will change the menu to the page 2/2
screen. When the menu page 2/2 screen has a ‰ (pointer) at
the very top part of it, pressing the remote control's
button again will change the menu to the 1/2 screen.
button until the menu
page 1/2
OFF
OFF
SINGLE
CHAPTER
4800bps
OFF
OFF
FRAME
OFF
page 2/2
OFF
OFF
OFF
ON
or button
Move the ‰ (pointer) to the item you want to set with the
remote control unit's or
setting with the remote control unit's
Menu setup is explained in detail from the next page.

CLEARING THE MENU SCREEN

Press the button.
÷The menu screen disappears.
NOTE:
When the menu screen is closed the settings will be
stored in the internal memory.
If this unit's power is turned OFF while the menu setup
screen is open, settings will be erased without being
stored.
ADVANCED FEATURE menu setup
button and change the
or button.
9
<VRB1208>