Connection Of Mouse And Keyboard - Pioneer DVD-V7200 Operating Instructions Manual

Pioneer dvd player operating instructions dvd-v7200

Table of Contents

CONNECTION OF MOUSE AND KEYBOARD

A commercially available PS/2 mouse or PS/2 keyboard can be connected to this unit's mouse/keyboard connector as follows.

If you want to use both the mouse and keyboard, connect them using a commercially available "Y" cable.

Note:

÷ The power rating of this MOUSE/KEYBOARD connector is no more than 100mA. Do not use a mouse or keyboard with a

current drain exceeding the rating of 100mA.

÷ Certain commercially available PS/2 mouse models, PS/2 keyboard models and "Y" cables may not be compatible with

this unit. For details, please consult PIONEER technical support.

* PS/2 is a registered trademark of IBM corporation.

1. Turn this unit's POWER off to set it to

the standby mode.

2. Connect the PS/2 *mouse or PS/2

*keyboard to this unit's MOUSE/KEY-

BOARD connector.

3.Turn this unit's POWER ON.

Connection is now complete.

Connection of mouse and keyboard

Table of Contents