To Change The Display Mode; Pencil Tool/Freehand Drawing - Pioneer DVD-V7200 Operating Instructions Manual

GROUP 001
001 R–3, RED 02-015.29~015.36 A
Freehand drawing is possible by
holding the mouse's left button.
CHARACTER INPUT/PICTURE DRAWING
Indicator on the top right
AUTO DISP
SAVE
DEL EXIT

TO CHANGE THE DISPLAY MODE

1. Move the cursor to the line you want to change and
click the left button of the mouse.
2. Move the cursor to
the mouse.
Indicator display on the right edge of screen
A : Displayed at the same time as the disc playback, from the
set start point through the set end point.
A S : The video becomes a still image at the set start point.
– A S : The video becomes a still image immediately before the
set start point.
No display: The set characters or pictures are not displayed.
Pressing the
S : The video becomes the still image at the set start point but
objects are not displayed.
Press the button on the remote control unit to start
picture drawing.
* : The * mark is displayed on the top right of the screen during
playback.
Pressing the
* S : The video becomes a still image, in which only the * mark
is displayed, at the set start point.
Press the button on the remote control unit to start
picture drawing.
Meaning of displayed symbols
"S" stands for "Still image" and plays a still image at the IN point.
"A" stands for "Auto display", which displays drawing in the screen
set with AUTO DISP.
"*" displays only the * marking.
"–" displays a still image immediately before the start of the IN
point.

PENCIL TOOL/FREEHAND DRAWING

Click the right button of the mouse in the video blackboard input screen
to turn the pointer into the pencil tool. Freehand drawing is possible
by holding the mouse's left button.
Clicking the right button again displays the Blackboard screen.
CAUTION:
÷ Pictures can be drawn using the pencil tool but they cannot be
saved later.
÷ To change the color or line width, select
the Blackboard screen. (See "Drawing Tools" on page 19.)
Character input/picture drawing
and click the left button of
AUTO DISP
button in this section starts drawing.
button in this section starts drawing.
or the
COLR
tool on
21
<VRB1208>