Recalling/Executing Previously Input Barcode Commands; From List View - Pioneer DVD-V7200 Operating Instructions Manual

BC/COMMAND STACK GROUP 001/ 003
001 PLAY
002 03:123000–129000
003 05:03–07 03 2 1
004
005
006
007
008
BARCODE/COMMAND STACK screen
USING A BARCODE/COMAND STACK
RECALLING/EXECUTING
BARCODE COMMANDS FROM THE LIST VIEW
1
. Press the button.
2
. Press the button.
3
. Press the button.
÷ The
button is defeated unless the function mode is switched
off.
4
. Press the button.
÷ This displays a list of commands.
5
. Select a group by pressing the
÷ Select the command group containing the command(s) to be
executed.
6
. Select a step by pressing the
÷ Select the command step to begin execution with. If the command
step number is left to "001" in this step, the commands in the
entire command group will be executed.
7
. Press the or
÷ Pressing the
button starts consecutive execution.
÷ Pressing the
button starts step-by-step execution.
Some titles may not be able to be recalled and executed.
Example)
The search command cannot be executed with a title that does not
show the chapter, time and similar information on the screen or with
a disc that is not permitted to use the search function.
Recalling/executing previously input barcode
commands FROM THE list VIEW
PREVIOUSLY INPUT
or button.
or button.
button.
43
<VRB1208>