Adding A Step In A Previously Input Barcode/Command Stack - Pioneer DVD-V7200 Operating Instructions Manual

ADDING A STEP IN A PREVIOUSLY INPUT BARCODE/COMMAND STACK

BC/COMMAND STACK GROUP 001/ 001
001 PLAY
002
003 03:123000–129000
004 05:03–07
005
006
007
008
SAVE DEL
Adding a step in a previously
input Barcode/Command Stack
34
<VRB1208>
03 2 1
INS EXIT
ADDING A STEP IN A PREVIOUSLY INPUT
BARCODE/COMMAND STACK
1
. Perform steps 1 to 4 of "Correcting a previously input
Barcode/Command Stack".
2
. Select the step where a new step is to be inserted by
pressing the or
3
. Move the > (pointer) to "INS" by pressing the
button and press the
÷ This inserts a new step before the selected step and the numbers
of subsequent steps are incremented by 1.
4
. Press the button.
÷ This initiates the Barcode/Command Stack input mode.
5
. Press the button to initiate the numeral input
mode.
6
. Set a step in the same way as "Setting a barcode com-
mand".
. Move the ‰ (pointer) to "SAVE" by pressing the
7
button and press the
button.
button.
button.
or