Setup Of Laserbarcode Compatible Discs; Video, Audio Setup - Pioneer DVD-V7200 Operating Instructions Manual

SETUP OF LASERBARCODE COMPATIBLE DISCS

BC/COMMAND STACK GROUP 001: 001
TITLE
SEARCH FRAME
MARK
VIDEO
AUDIO
Display when the example on the right
is input
Barcode/Command Stack Setting
30
<VRB1208>
LD
01500
FRAME 01800
0
3
BARCODE/COMMAND STACK SETTING
Example) Playback of "analog stereo" audio channel from frame
1500 to 1800 without video.
1. Press the
÷
The TITLE number will blink.
2. Press the
÷
Be sure to set the laser barcode compatible disc command
to the TITLE LD display.
=
3. Press
÷
The start frame number is entered.
÷
If the procedure up until this point has been done during
playback, the start frame that was input is searched for.
=
4. Press
÷
The stop frame number is entered.
5. As the VIDEO number will blink, press
÷
The playback picture disappears.
6. As the AUDIO number will blink, press
÷
Audio will be entered and the next step proceeded to.
7. Press the button to return to the cursor mode.
NOTE:
Pressing the button after step 2 will select the chapter input
mode. Refer to example 3 on page 27 for the input methods of
SEARCH CHAPTER and MARK CHAPTER.

VIDEO, AUDIO SETUP

VIDEO:
÷ Inputting 1 selects normal video output.
÷ Inputting 0 selects the background color set on the GUI menu
and cancels the playback picture.
÷ Inputting 9 maintains the previous mode. Input when you want
to leave the VIDEO setting as is and change other settings.
÷ 2 to 8 are invalid.
AUDIO:
On laser barcode compatible discs, laser disc digital audio and analog
audio are converted and recorded in the DVD format.
Audio can be selected as follows.
÷ Inputting 0 selects the Audio OFF playback mode.
÷ Inputting 1 selects the "Analog audio 1/L" playback mode.
÷ Inputting 2 selects the "Analog audio 2/R" playback mode.
÷ Inputting 3 selects the "Analog audio" stereo mode.
÷ Inputting 5 selects the "Digital audio 1/L" mode.
÷ Inputting 6 selects the "Digital audio 2/R" mode.
÷ Inputting 7 selects the "Digital audio" stereo mode.
÷ Inputting 9 maintains the previous mode.
÷ 4 and 8 are invalid.
CAUTION:
When "Maintaining previous mode" is selected "*" is displayed on
the input screen.
button.
button to display LD.
= = =
= = =
.
.
.
.