Correcting A Previously Input Barcode/Command Stack - Pioneer DVD-V7200 Operating Instructions Manual

CORRECTING A PREVIOUSLY INPUT BARCODE/COMMAND STACK

BC/COMMAND STACK GROUP 001: 003
TITLE
SEARCH CHAPTER
MARK CHAPTER
SUBTITLE
AUDIO
ANGLE
SAVE DEL
BC/COMMAND STACK GROUP 001: 003
TITLE
SEARCH CHAPTER
MARK CHAPTER
SUBTITLE
AUDIO
ANGLE
SAVE DEL
CAUTION:
To save the corrected information, move ‰ (pointer) to
the last item (ANGLE in this example) by pressing the
button repeatedly.
Press the button one more time to move to the
page for the next step.
In this "next step", move ‰ (pointer) to SAVE and press
the button to save data.
The corrected information is not saved if ‰ (pointer) is
moved to SAVE and the
the end of correction (in the middle of the step being
corrected).
05
03
05
03
2
1
INS EXIT
«
05
03
05
03
1
1
INS EXIT
button is pressed before
CORRECTING
BARCODE/COMMAND STACK
Example) To change the Audio setting of step 003 from 2 to 1
1
. Press the button.
÷ "BARCODE/COMMAND" is displayed.
2
. Press the button.
÷ The Barcode/Command Stack screen is displayed.
3
. Select "NO" with the
the button.
÷ The Barcode/Command Stack Input screen is displayed when the
button is pressed.
4
. Press the button.
÷ The list display appears.
. Select "003 ‰" by pressing the
5
6
. Press the button.
÷ This initiates the Barcode/Command Stack input mode.
7
. Press the button to initiate the numeral input
mode.
8
. Press the button 4 times to select item "AUDIO".
9
. Press button.
10. Press
button.
÷ The next step's Barcode/Command Input screen is displayed.
11
.Press the button to return to the cursor mode.
the ‰ (pointer) to "SAVE" by pressing the
12. Move
button and press the
Correcting a previously input
A PREVIOUSLY
or button and press
or
button.
Barcode/Command Stack
INPUT
button.
33
<VRB1208>