Figure 5-2 Diagram Of Input/Output Bus Bars And Terminal Blocks - Toshiba G9000 SERIES Installation And Operation Manual

Detailed AC Power Terminals
For power terminals, use 1/2"
(12mm) diameter bolts.
※1. Signal lines should be separated to the main circuit cables with more than 100mm insulating distance.
The wiring also should fix to the frame to ensure the insulating distance satisfied the condition.
※2. 3x 2-holes bases
※3. 4x 4-holse bases
G9000 Installation and Operation Manual – 61480-012

Figure 5-2 Diagram of input/output bus bars and terminal blocks

Location of bus bars and terminal blocks (Bottom/Top/ Entry)
35.5"(901.6)
External
signal line
access
E
BP
BN
E
Grounding Bar
Cable Entry Section – Left Side View
1
※
DC
Input
※3
※2
UPS cabinet – Front View
37
118.1"(3003.2)
※2 ※2
※3
※3