Ricoh SP 8400DN User Manual page 73

Problem
Misfeeds occur frequently.
Cannot print in duplex
mode.
Cannot print in duplex
mode.
The machine does not turn
off in 5 minutes after the
main power is turned off.
An error has occurred when
the Address Book is
changed from the display
panel or Web Image
Monitor.
The Address Book cannot be
changed from the display
panel.
Cause
There is a foreign object on
the finisher tray.
You have selected a paper
tray that is not set for duplex
printing.
You have selected a paper
type that cannot be used for
duplex printing.
The machine cannot perform
the shutdown procedure.
The Address Book cannot be
changed while you delete
the multiple stored
documents.
The Address Book cannot be
changed while it is being
backed up from Web Image
Monitor or other tools
running on the computer.
When You Have Problems Operating the Machine
Solution
• Remove the misfed paper. For
details about removing jammed
paper, see page 92 "Removing
Jammed Paper".
• Do not place anything on the
finisher tray.
Change the setting for "Apply Duplex"
in "Tray Paper Settings" to enable
duplex printing for the paper tray. For
details about setting "Apply Duplex",
see "Tray Paper Settings", Operating
Instructions.
In "Tray Paper Settings", select a paper
type that can be used for duplex
printing. For details about setting
"Paper Type", see "Tray Paper
Settings", Operating Instructions.
Repeat the shutdown procedure. If the
machine does not turn off, contact your
service representative.
Wait a while, and then retry the
operation.
• Wait until the Address Book
backup is complete, and then try
to change the Address Book
again.
• If an SC997 error occurs, press
[Exit].
71