Table of Contents
Advertisement
Warning messages
If a warning message is displayed after the measurement, you can still save the measurement results by following on-screen instructions.
However, we recommend you perform YPAO again in order to use the unit with the optimal speaker settings.
Warning message
W-1: Out of Phase
A speaker cable may be connected with the reverse polarity (+/-).
A speaker is placed more than 24 m (80 ft) from the listening
W-2: Over Distance
position.
W-3: Level Error
There are significant volume differences between the speakers.
Cause
Select "Wiring" in "Result" (p.46) and check the cable connections (+/-) of the speaker identified by "Reverse".
If the speaker is connected incorrectly:
Turn off the unit and then reconnect the speaker cable.
If the speaker is connected correctly:
Depending on the type of speakers or room environment, this message may appear even if the speakers are
connected correctly. In this case, you can ignore the message.
Select "Distance" in "Result" (p.46) and move the speaker identified by ">24.00m (>80.0ft)" within 24 m (80 ft) of the
listening position.
Check the usage environment and cable connections (+/-) of each speaker, and the volume of the subwoofer. We
recommend using the same speakers or speakers with specifications that are as similar as possible.
49
En
Remedy
Advertisement
Table of Contents
