Warning Messages - Yamaha AVENTAGE RX-A3080 Owner's Manual

Warning messages

If a warning message is displayed after the measurement, you can still save the measurement
results by following on-screen instructions.
However, we recommend you perform YPAO again in order to use the unit with the optimal
speaker settings.
Warning message
WARNING 1
A speaker cable may be
connected with the reverse
polarity (+/-).
WARNING 2
A speaker is placed more than
24 m (80 ft) from the listening
position.
WARNING 3
There are significant volume
differences between the
speakers.
66
En
Remedy
Select "Wiring" in "Measurement result" (p.64) and check the cable
connections (+/-) of the speaker identified by "Reverse".
If the speaker is connected incorrectly:
Turn off the unit and then reconnect the speaker cable.
If the speaker is connected correctly:
Depending on the type of speakers or room environment, this message
may appear even if the speakers are connected correctly. In this case,
you can ignore the message.
Select "Distance" in "Measurement result" (p.64) and move the speaker
identified by ">24.00m (>80.0ft)" within 24 m (80 ft) of the listening
position.
Select "Level" in "Measurement result" (p.64) and check the speaker
identified by "Over ±10.0dB", then check the usage environment and
cable connections (+/-) of each speaker, and the volume of the
subwoofer. We recommend using the same speakers or speakers with
specifications that are as similar as possible.