Planet IGS-5225-16T4S User Manual page 43

10Gbps SFP+ (10G Ethernet/10GBASE)
Model Speed (Mbps)
MTB-SR 10G
MTB-LR 10G
10Gbps SFP+ (10GBASE-BX, Single Fiber Bi-directional SFP)
Model Speed (Mbps)
MTB-LA20 10G
MTB-LB20
10G
MTB-LA40 10G
MTB-LB40
10G
MTB-LA60 10G
MTB-LB60
10G
1. It is recommended to use PLANET SFP/SFP+ on the Industrial Managed Switch. If you
insert an SFP/SFP+ transceiver that is not supported, the Industrial Managed Switch will
not recognize it.
2. Please choose the SFP/SFP+ transceiver which can be operated under -40~75 degrees C
temperature if the switch device is working in a 0~50 degrees C temperature environment.
1. Before we connect the Industrial Managed Switch to the other network device, we have to make sure both sides of the
SFP transceivers are with the same media type, for example: 1000BASE-SX to 1000BASE-SX, 1000BASE-LX to
1000BASE-LX.
2. Check whether the fiber-optic cable type matches with the SFP transceiver requirement.
 To connect to 1000BASE-SX SFP transceiver, please use the multi-mode fiber cable with one side being the male
duplex LC connector type.
 To connect to 1000BASE-LX SFP transceiver, please use the single-mode fiber cable with one side being the male
duplex LC connector type.

Connect the Fiber Cable
1. Insert the duplex LC connector into the SFP/SFP+ transceiver.
2. Connect the other end of the cable to a device with SFP/SFP+ transceiver installed.
3. Check the LNK/ACT LED of the SFP/SFP+ slot on the front of the Managed Switch. Ensure that the SFP/SFP+
transceiver is operating correctly.
1. Check the Link mode of the SFP/SFP+ port if the link fails. To function with some fiber-NICs or Media Converters, user
has to set the port Link mode to "10G Force", "1000M Force" or "100M Force".
Connector
Fiber Mode
Interface
LC Multi Mode
LC Single Mode
Connector
Fiber Mode Distance Wavelength (TX) Wavelength (RX) Operating Temp.
Interface
WDM(LC) Single Mode
WDM(LC) Single Mode
WDM(LC) Single Mode
WDM(LC) Single Mode
WDM(LC) Single Mode
WDM(LC) Single Mode
User's Manual of IGS-5225 series
Distance Wavelength (nm)
Up to 300m
10km
20km 1270nm
20km 1330nm
40km 1270nm
40km 1330nm
60km 1270nm
60km 1330nm
43
Operating Temp.
850nm 0 ~ 60 degrees C
1310nm 0 ~ 60 degrees C
1330nm 0 ~ 60 degrees C
1270nm 0 ~ 60 degrees C
1330nm 0 ~ 60 degrees C
1270nm 0 ~ 60 degrees C
1330nm 0 ~ 60 degrees C
1270nm 0 ~ 60 degrees C