Planet IGS-5225-16T4S User Manual page 261

The page includes the following fields:
Global Configuration
These setting are common for all of the TACACS+ Servers.
Object
 Timeout
 Dead Time
 Key
Server Configuration
The table has one row for each TACACS+ server and a number of columns, which are:
Object
 Delete
 Hostname
 Port
 Timeout
 Key
Buttons
: Click to undo the addition of the new server.
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Description
Timeout is the number of seconds, in the range 1 to 1000, to wait for a reply from
a TACACS+ server before it is considered to be dead.
The Dead Time, which can be set to a number between 0 to 1440 minutes, is the
period during which the switch will not send new requests to a server that has
failed to respond to a previous request. This will stop the switch from continually
trying to contact a server that it has already determined as dead.
Setting the Deadtime to a value greater than 0 (zero) will enable this feature, but
only if more than one server has been configured.
The secret key - up to 63 characters long - shared between the TACACS+ server
and the switch.
Description
To delete a TACACS+ server entry, check this box. The entry will be deleted during
the next Save.
The IP address or hostname of the TACACS+ server.
The TCP port to use on the TACACS+ server for authentication.
This optional setting overrides the global timeout value. Leaving it blank will use the
global timeout value.
This optional setting overrides the global key. Leaving it blank will use the global key.
d a new TACACS+ server. An empty row is added to the table, and the
: Click to ad
TACACS+ server can be configured as needed. Up to 5 servers are supported.
User's Manual of IGS-5225 series
261