Reset Button Pressed and Released
< 5 sec: System Reboot
> 5 sec: Factory Default
■ AC Power Receptacle
For compatibility with electrical service in most areas of the world, the Managed Switch's power supply automatically
adjusts to line power in the range of 100-240V AC and 50/60 Hz.
Plug the female end of the power cord firmly into the receptacle on the front panel of the Managed Switch and the other end
into an electrical outlet, and then the power will be ready.
Figure 2-5: Reset Button of IGS-5225-16T4S
Figure 2-6: Reset Button of IGS-5225-24P4S
Function
Reboot the Industrial Managed Switch.
Reset the Industrial Managed Switch to Factory Default
configuration. The Industrial Managed Switch will then reboot
and load the default settings as shown below:
Default Username: admin
。
Default Password: admin
。
Default IP address: 192.168.0.100
。
Subnet mask: 255.255.255.0
。
Default Gateway: 192.168.0.254
。
27
User's Manual of IGS-5225 series