Move Print-Heads - Ricoh Ri 100 Operating Instructions Manual

3. Press the [ ] or [ /Menu] key to display [Date/Time], and then press the [#Enter] key.
<Maintenance>
Date/Time
4. Press the [ ] or [ /Menu] key to display [Time Zone], and then press the [#Enter] key.
<Date/Time>
Time Zone
5. Press the [ ] or [ /Menu] key to set the time zone, and then press the [#Enter] key.
<Time Zone>
GMT+00:00
6. Press the [Escape] key.

Move Print-Heads

If a foreign object remains inside the machine, move the print head and remove it. The machine reboots
when the operations are completed. Print a [Nozzle Check] test pattern to check whether the print head
nozzles are clogged.
• Do not open the cover while the machine is operating and keep your hands or fingers clear of
the machine. Doing so might cause your hands or fingers to get trapped in the machine,
potentially causing injury.
• After moving the print head and turning the power off, be sure to turn the power back on. Do not
keep the print head moving.
• Do not touch the toothed rubber belt and ink tube. Moreover, pay attention not to have your
sleeves caught on the ink tube or cables.
1
2
1. Toothed rubber belt
DSA504
Using the [Maintenance] Menu
131