1. About This Product
This chapter describes the names and functions of the machine's parts and options.
Guide to Components
Front View
1. Rear Cover
2. Top Cover
Normally, keep this cover closed. For safety reasons, opening or closing the top cover will cause the power to
turn off immediately. Do not open or close the top cover when not required, such as while printing is
performed. When a message prompting you to open the top cover appears on the display, follow the
instructions.
3. Vent
Air is vented here to prevent the inside of the machine from getting too warm. Do not lean anything against the
vent or block it in any way. If the inside of the machine gets too warm, a breakdown could occur.
4. Right Front Cover
Normally, keep this cover closed. Open this cover only when you need to install or replace an ink cartridge or
replace the ink collector unit.
5. Indentations for Lifting
6. Cassette Stand
Stand for setting the cassette.
1
2
3
5
4
5
6
DSA261
15