Figure 2-33 Mdfl Function Block Example - Honeywell UMC800 Reference Manual

2.36 MDFL Function Block,
Example
Figure 2-33 shows a Function Block Diagram using an MDFL function block. The mode output of the PID
Block is used exclusively with the MDFL (Mode Flags) Block.
Any of the status outputs may be referenced by a Signal Tag or may be transferred externally using a DO.
The output shown is ON when in Manual and OFF when in Automatic.
3/99
continued

Figure 2-33 MDFL Function Block Example

Function Block Reference Guide
Function Blocks
101