Menu Screens
4.6 Utilities Menu
4. Select the [Gas/Process Calcs.], [Installation Calcs.] or [Application Problems] tab, if
5. Si-Ware will calculate the recommended sensor type, sensor size, mounting method and
Figure 4-3
Gas Sensor Selection and Sizing Tool screen
Note
S-Filter
If the S-Filter is selected it will limit the list of sensors to only those available for the
application. De-selecting the S-Filter allows all sensors to be selected.
Gas Composition and Mole % Screen
To display a [Gas Composition and Mole Fraction %] screen:
1. Select [Use AGA8 Gas(es)] from the [Gas Selection] drop down menu.
2. Click the [AGA8 Gas Comp] button.
3. The [Gas Composition and Mole Fraction %] screen will open.
36
available, to view desired outputs. The [Application Problems] tab will not be available if
there are no problems present.
spacing offset.
Programming Manual, 10/2011, A5E02951525-03
Si-Ware Quick Start