Siemens SITRANS F Programming Manual page 46

Menu Screens
4.6 Utilities Menu
Load Op. Sys.
This screen allows the uploading of a flowmeter operating system.
Note
IMPORTANT
The [Load Op. Sys] function can only be implemented under the direction of Siemens
technical service personnel.
Save/Restore Sites
This screen allows you save site setups to your local drive and retrieve those sites at a later
date to send to the flowmeter.
Note
Special Characters
The MS Windows special characters \ / : * ? " < > | cannot be used when naming site data
files.
Blank spaces are also not allowed in file names.
Note
When retrieving stored sites make sure there are no active graphic menu displays on the
flowmeter (e.g. flow screen). Graphic menu displays require large amounts of flowmeter
processing time and may prevent site retrieval function from working properly.
44
Programming Manual, 10/2011, A5E02951525-03
Si-Ware Quick Start