Section 10 Session Management - NEC SMB8000 Manual

Issue 3.0
___________________________________________________________________________________
S 10 S
ECTION ESSION
This screen allows users to manage the site setup parameters and change the user
password.
Change Site Setup:
Change Current User:
Click Apply to accept the changes.
Click Refresh if your web page cannot be displayed or to ensure the latest version of
the page is displayed.
Click Home to return to the Home Menu.
The new password and/or user name is enabled after Apply is pressed.
___________________________________________________________________________________
5 - 18
M
ANAGEMENT
Site Name – This field allow you to assign a Site Name to the CD-ETIA
IP Address – This field allows you to manually configure an IP Address
Subnet Mask – Enter the subnet mask of the currently configured IP Address
Default Gateway – Enter the address of the Default Gateway
Manually setting the networking address is not recommended on
the SV8100 system. However, the SV8300 system must be set
manually. The SV8100 system supports the use of Program
10-55-01 ~ 10-55-05.
User Name
The CD-ETIA blade default with one user "admin".
New Password
Enter the new desired password.
Old Password
Confirm the old password before new information will be accepted.
Gigabit PoE Switch Web Manager
SMB8000