Table of Contents
Advertisement
Level 1 and 2 Service Manual
Replacing the Rear Housing
6809471A67-O
4.
Lift the rear housing from the front housing as shown in Figure 11.
Rear Housing
Rear Housing
Figure 11. Removing the Rear Housing
1.
Connect the flex cable connector to its socket on the transceiver board.
2.
Align the 4 front housing catches with the matching slots in the rear housing
then firmly press the rear housing to the front housing until the catches engage
and the housings are properly assembled.
3.
Replace the light guide, antenna, battery, and battery cover as described in the
procedures.
August 20, 2003
Rear Housing Flex Cable
Disassembly
031753o
31
Advertisement
Table of Contents
Troubleshooting
