Disassembly
Removing and Replacing the Rear Escutcheon
Removing and Replacing the Rear Housing
G
G
19
5.
Slide the SIM latch to lock in place.
6.
Replace the battery as described in the procedures.
DISASSEMBLY
TOOL
REAR
HOUSING
ESCUTCHEON
Figure 9. Removing the Rear Escutcheon
1.
Remove the battery as described in the procedures.
2.
Using the flat end of the disassembly tool, carefully peel the escutcheon from
the rear housing. See Figure 9.
3.
To replace, remove the protective paper backing from the new escutcheon and
carefully align it with the cavity molded into the rear housing.
4.
Press the escutcheon firmly into place making sure pressure is applied evenly
across the entire surface to ensure a tight bond.
5.
Replace the battery as described in the procedures.
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
The housing is fastened with plastic catches. These are delicate and should be parted
using utmost care.
1.
Remove the battery and SIM as described in the procedures.
October 23, 2001
Product Family C25
010701-o
6881039B15