Error Codes - Olympus E-M10 Mark III Instruction Manual

Error codes

Monitor indication
The card is not inserted, or it
cannot be recognized.
No Card
There is a problem with the card.
Card Error
Writing to the card is prohibited.
Write Protect
• The card is full. No more
• There is no space in the card
Card Full
Card Setup
Clean the contact area of
the card with a dry cloth. Card cannot be read. Card may
not have been formatted.
Clean Card
Format
Set
There are no pictures on the
card.
No Picture
The selected picture cannot be
displayed for playback due to
a problem with this picture. Or
the picture cannot be used for
Picture Error
playback on this camera.
Pictures taken with another
camera cannot be edited on this
The Image Cannot
camera.
Be Edited
Possible cause
pictures can be taken or no
more information such as print
reservation can be recorded.
and print reservation or new
images cannot be recorded.
Corrective action
Insert a card or insert a different
card.
Insert the card again. If the
problem persists, format the card.
If the card cannot be formatted, it
cannot be used.
The card write-protect switch is set
to the "LOCK" side. Release the
switch. (P. 133)
Replace the card or erase
unwanted pictures.
Before erasing, download
important images to a PC.
• Select [Clean Card], press the
Q and turn off the camera.
Remove the card and wipe the
metallic surface with a soft, dry
cloth.
• Select [Format][Yes], and then
press the Q to format the card.
Formatting the card erases all
data on the card.
The card contains no pictures.
Record pictures and play back.
Use image processing software to
view the picture on a PC.
If that cannot be done, the image
fi le is damaged.
Use image processing software to
edit the picture.
8
145
EN