Table of Contents
Advertisement
[ Multiple Exposure]: Shooting Multiple Exposures
Combine two different images on top of one another.
1
Highlight [Multiple Exposure] in the AP mode menu (P. 32) and press the
Q button.
2
Press the shutter button halfway down to focus.
• If the focus indicator blinks, the camera is not in focus.
3
Press the shutter button all the way down for the fi rst shot.
• a is displayed in green if shooting starts.
• The image is shown superimposed on the monitor.
• Press to delete the last shot.
4
Take the second shot.
• Use the fi rst image as a guide to compose the second shot.
• The camera will not go to sleep while multiple exposure is in effect.
• Performing any of the following actions automatically deletes the second shot:
The camera is turned off, the q button is pressed, the MENU button is pressed,
pressing the u button, rotating the mode dial, the battery power runs out, or any cable
is connected to the camera.
%
Tips
• For more information on creating image overlays: g "Image overlay" (P. 105)
2
35
EN
Advertisement
Table of Contents
