Olympus E-M10 Mark III Instruction Manual page 86

t (AEL/AFL)
z (Preview)
k (One-touch white
2
balance)
N (AF Area Select)
MF
F (Exposure
compensation)
b (Digital Tele-converter)
U (Magnify)
Peaking
G (Switch G Lock)
86 EN
Press the button to use AE lock or AF lock. The function
changes according to the [AEL/AFL] (P. 115) setting.
When AEL is selected, press the button once to lock the
exposure and display u on the monitor. Press the button
again to cancel the lock.
Aperture is stopped down to the selected value while the
button is pressed.
Press the shutter button while the button is pressed to
acquire a white balance value (P. 71). Highlight the
desired number and press the Q button to save the value.
Press the button to choose the AF target (P. 61).
Press the button to select [MF] mode. Press the button
again to restore the previously selected AF mode. Hold the
button and rotate the front or rear dial to choose a focus
mode.
Press the button to adjust exposure compensation.
In P, A, S, ART, Z, and movie modes, you can adjust
exposure compensation by pressing the button and using
HI or the front or rear dial to choose the desired value.
In M mode, you can adjust shutter speed or aperture by
pressing the button and using FGHI or the front or rear
dial to choose the desired values.
Press the button to turn digital zoom [On] or [Off] (P. 99).
Press the button to display the magnifi cation frame and
press it again to magnify the image. Press and hold the
button to cancel magnifi ed display.
Press the button to turn on and off the peaking display.
When peaking is displayed, histogram and highlight/
shadow display are not available (P. 115).
Press and hold the button to enable and disable touch
screen operation.