Adding Effects To A Movie - Olympus E-M10 Mark III Instruction Manual

Adding effects to a movie

You can create movies that take advantage of the effects available in still photography
mode.
1
Rotate the mode dial to
Press the Q button and use FG to highlight
2
movie (exposure) mode.
2
Use HI to choose a value and press the Q
3
button.
Optimal aperture is set automatically according to the brightness of the subject.
P
Use the front dial (r) or rear dial (o) to adjust exposure compensation.
Depiction of background is changed by setting the aperture.
A Use the front dial (r) to adjust exposure compensation and rear dial (o) to adjust
aperture.
Shutter speed affects how the subject appears. Use the front dial (r) to adjust
S
exposure compensation and rear dial (o) to adjust shutter speed.
Shutter speed can be set to values between 1/24 s and 1/4000 s.
Aperture and shutter speed can be manually set.
Use the front dial (r) to select aperture value and the rear dial (o) to select
M shutter speed.
Shutter speed can be set to values between 1/24 s and 1/4000 s.
ISO sensitivity can only be set manually to values between 200 and 6400.
• Blurred frames caused by such factors as the subject moving while the shutter is open
can be reduced by selecting the fastest available shutter speed.
• The low end of the shutter speed changes according to the frame rate of the movie record
mode.
• Excessive camera shake may not be compensated enough.
• When the inside of the camera becomes hot, shooting is automatically stopped to protect
the camera.
• With some art fi lters, [C-AF] function is limited.
76 EN
n
.
Program Auto
n
P A S M
Movie (exposure) mode
ISO
AUTO
WB WB
AUTO AUTO
C-AF C-AF
P
L F
1:02:03
1023