Error Codes - Olympus IM002 Instruction Manual

Lines appear in photographs
The following functions use an electronic shutter, which may result in lines due to fl icker and
other phenomena associated with fl uorescent and LED lighting, an effect that can sometimes
be reduced by choosing slower shutter speeds:
movie recording (P. 36), silent mode (P. 47), Pro Capture shooting (P. 48), High Res Shot (P. 48),
focus bracketing (P. 94)

Error codes

Monitor
indication
No Card
5 Card Error
8
4 Card Error
5 Write Protect
4 Write Protect
5 Card Full
4 Card Full
162 EN
Possible cause
The card is not inserted, or it
cannot be recognized.
There is a problem with the card
in slot 1.
There is a problem with the card
in slot 2.
Writing to the card in slot 1 is
prohibited.
Writing to the card in slot 2 is
prohibited.
The card is full. No more
pictures can be taken or no
more information such as print
reservation can be recorded.
There is no space in the card and
print reservation or new images
cannot be recorded.
The card is full. No more
pictures can be taken or no
more information such as print
reservation can be recorded.
There is no space in the card and
print reservation or new images
cannot be recorded.
Corrective action
Insert a card. Or reinsert the card
properly.
Insert the card again. If the
problem persists, format the card.
If the card cannot be formatted, it
cannot be used.
The card write-protect switch is
set to the "LOCK" side. Release
the switch. (P. 147)
Replace the card or erase
unwanted pictures.
Before erasing, download
important images to a PC.