To configure WINS servers and NetBIOS node type in the DHCP address pool:
Step
1.
Enter system view.
2.
Enter DHCP address pool
view.
3.
Specify WINS server IP
addresses.
4.
Specify the NetBIOS node
type.
Configuring BIMS server information for the client
The DHCP server must provides DHCP clients with the branch intelligent management system (BIMS)
server IP address, port number, shared key from the DHCP address pool, to enable DHCP clients to
perform regular software update and backup by using configuration files obtained from a BIMS server.
To configure the BIMS server IP address, port number, and shared key in the DHCP address pool:
Step
1.
Enter system view.
2.
Enter DHCP address pool
view.
3.
Specify the BIMS server IP
address, port number, and
shared key.
Configuring gateways for the client
You can specify up to eight gateways in a DHCP address pool.
To configure the gateways in the DHCP address pool:
Step
1.
Enter system view.
2.
Enter DHCP address pool
view.
3.
Specify gateways.
Command
system-view
dhcp server ip-pool pool-name
[ extended ]
nbns-list ip-address&<1-8>
netbios-type { b-node | h-node
| m-node | p-node }
Command
system-view
dhcp server ip-pool pool-name
[ extended ]
bims-server ip ip-address [ port
port-number ] sharekey [ cipher |
simple ] key
Command
system-view
dhcp server ip-pool pool-name
[ extended ]
gateway-list ip-address&<1-8>
45
Remarks
N/A
N/A
Optional for b-node.
No address is specified by default.
Not specified by default.
Remarks
N/A
N/A
Not specified by default
Remarks
N/A
N/A
No gateway is specified by
default.