HP 3600 v2 Series Configuration Manual page 31

Figure 11 Network diagram
192.168.10.100/16
Host A
192.168.10.99/16
Configuration procedure
Configure Switch B:
1.
# Create VLAN 2, VLAN 3, and VLAN 5 on Switch B. Add Ethernet 1/0/3 to VLAN 2, Ethernet
1/0/1 to VLAN 3, and Ethernet 1/0/2 to VLAN 5. Configure VLAN 5 as the isolate-user-VLAN,
and VLAN 2 and VLAN 3 as secondary VLANs. Configure the mappings between
isolate-user-VLAN and the secondary VLANs.
<SwitchB> system-view
[SwitchB] vlan 2
[SwitchB-vlan2] port Ethernet 1/0/3
[SwitchB-vlan2] quit
[SwitchB] vlan 3
[SwitchB-vlan3] port Ethernet 1/0/1
[SwitchB-vlan3] quit
[SwitchB] vlan 5
[SwitchB-vlan5] port Ethernet 1/0/2
[SwitchB-vlan5] isolate-user-vlan enable
[SwitchB-vlan5] quit
[SwitchB] interface Ethernet 1/0/2
[SwitchB-Ethernet1/0/2] port isolate-user-vlan 5 promiscuous
[SwitchB-Ethernet1/0/2] quit
[SwitchB] interface Ethernet 1/0/1
[SwitchB-Ethernet1/0/1] port isolate-user-vlan host
[SwitchB-Ethernet1/0/1] quit
[SwitchB] interface Ethernet 1/0/3
[SwitchB-Ethernet1/0/3] port isolate-user-vlan host
[SwitchB-Ethernet1/0/3] quit
[SwitchB] isolate-user-vlan 5 secondary 2 3
Configure Switch A:
2.
# Create VLAN 5 and add Ethernet 1/0/2 to it.
<SwitchA> system-view
[SwitchA] vlan 5
Switch A
Eth1/0/2
VLAN 5
Vlan-int5
Eth1/0/2
VLAN 5
Eth1/0/3
VLAN 2
Eth1/0/1
VLAN 3
Switch B
192.168.10.200/16
Isolate-user-vlan 5
Secondary VLAN 2 and 3
Host B
20