Configuration procedure
Before performing the following configuration, make sure the device and the host are accessible to each
other via available routes, and that the IP addresses of the interfaces are configured as shown
This configuration may vary with DNS servers. The following configuration is performed on a PC running
Windows Server 2000.
Configure the DNS server:
1.
Select Start > Programs > Administrative Tools > DNS.
a.
The DNS server configuration page appears, as shown in
Right click Forward Lookup Zones, select New Zone, and then follow the steps to create a new
b.
zone named com.
Figure 44 Creating a zone
On the DNS server configuration page, right click zone com, and select New Host.
c.
95
Figure
44.
Figure
43.