Configuration Procedure - HP 3600 v2 Series Configuration Manual

Figure 48 Network diagram

Configuration procedure

Configure Switch A:
1.
# Specify the IP address for VLAN-interface 100.
<SwitchA> system-view
[SwitchA] interface Vlan-interface 100
[SwitchA-Vlan-interface100] ip address 10.154.5.1 24
# Enable IRDP on VLAN-interface 100.
[SwitchA-Vlan-interface100] ip irdp
# Specify preference 1000 for the IP address of VLAN-interface 100.
[SwitchA-Vlan-interface100] ip irdp preference 1000
# Configure the multicast address 224.0.0.1 as the destination IP address for RAs sent by
VLAN-interface 100.
[SwitchA-Vlan-interface100] ip irdp multicast
# Specify the IP address 192.168.1.0 and preference 400 for VLAN-interface 100 to
proxy-advertise.
[SwitchA-Vlan-interface100] ip irdp address 192.168.1.0 400
Configure Switch B:
2.
# Specify the IP address of VLAN-interface 100.
<SwitchB> system-view
[SwitchB] interface Vlan-interface 100
[SwitchB-Vlan-interface100] ip address 10.154.5.2 24
# Enable IRDP on VLAN-interface 100.
[SwitchB-Vlan-interface100] ip irdp
# Specify preference 500 for the IP address of VLAN-interface 100.
[SwitchB-Vlan-interface100] ip irdp preference 500
# Configure the multicast address 224.0.0.1 as the destination IP address for RAs sent by
VLAN-interface 100.
[SwitchB-Vlan-interface100] ip irdp multicast
# Specify the IP address 192.168.2.0 and preference 400 for VLAN-interface 100 to
proxy-advertise.
[SwitchB-Vlan-interface100] ip irdp address 192.168.2.0 400
103