Citizen CT-D150 Command Reference Manual page 499

Print Direction
Before an FF is sent (170th line), the following program code can be added to remove part of the data.
< Example 2 >
180 PRINT♯1，CHR$(&H1B);"W";CHR$(72);CHR$(0);CHR$(120);CHR$(0);
190 PRINT♯1，CHR$(36);CHR$(0);CHR$(48)CHR$(0);
200 PRINT♯1，CHR$(&H18);
As a result of the additional program code, a print-out is executed as shown in Figure 5-5 "Print Result of Adding a Program
of Example 3 to Example 2", where the string "GHI" is removed.
When strings are removed with CAN, the area where the string would have been is not used by the rest of the data, instead
it is converted into a sequence of spaces.
(0,0) 200
Page mode lesson
2CAN command
ABCDEFGHIJKLMNOP
400
QRST1234567890
Figure 5-4 Example 2: Result of Print
- 498 -
Paper
Print area