Esc S - Citizen CT-D150 Command Reference Manual

CT-S280
Support
model
CT-S281
CT-D151/E651

ESC S

[Function] Selecting STANDARD MODE
[Code] <1B>H<53>H
[Outline] [The specification which is common to the model]
• Switches from PAGE MODE to STANDARD MODE.
[Caution] [The specification which is common to the model]
• This command is only effective if it is entered when in PAGE MODE.
• Any data mapped in PAGE MODE is erased.
• After this command is executed, the beginning of the line is taken as the next print start position.
• The print area defined by ESC W is initialized.
• The commands listed below, which have separate settings for STANDARD MODE and PAGE MODE, are
changed to the settings for STANDARD MODE use.
(1) Spacing setting:
(2) Line feed width setting:
• The following commands are valid only in setting in STANDARD MODE.
(1) ESC W
(2) ESC T
(3) GS $
• STANDARD MODE is selected when the printer is turned on or reset, or when ESC @ is executed.
[See Also] FF, ESC
CT-S300
CT-S310
ESC SP, FS S
ESC 2, ESC 3
Sets the space amount for setting print area in PAGE MODE.
Selects the printing direction of character in PAGE MODE.
Sets the absolute position of character vertical direction in PAGE MODE.
FF, ESC L
- 390 -
CT-S2000 CT-S4000
CT-S801/851 CT-S601/651
CT-S251 CT-D150/E351
CT-P29x series CT-S310II