Citizen CT-D150 Command Reference Manual page 270

CT-S280
Support
model
CT-S281
CT-D151/E651
CT-S601(II)/CT-S651(II)
• a=116: Sets the paper specified by (nL+nH×256).
(nL+nH×256)
1(Default) Specified single color paper.
Recommended 2-color
257
paper5
• a＝151: Sets the Bluetooth Security/Connect Device specified
・
by (nL+nH×256). [CT-S601II, CT-S651II]
(nL+nH×256) Security / Connect Device
1(Default) Low / All
2 Middle / All
3 Middle / Paired
4 High / All
5 High / Paired
• a＝155: Sets the Bluetooth device scan specified by (nL+nH×256).
[CT-S601II, CT-S651II]
(nL+nH×256) BT Device Scan
1 No Response
2(Default) Discoverable
• a＝156: Sets the Bluetooth Auto Reconnect request specified
by (nL+nH×256). [CT-S601II, CT-S651II]
(nL+nH×256) Auto Reconnect
1
2(Default)
CT-S300 CT-S2000 CT-S4000
CT-S310 CT-S801/851 CT-S601/651
Paper
Invalid
Valid
CT-S251 CT-D150/E351
CT-P29x series CT-S310II
• a=201: Outputs ACK to the position specified by (nL+nH×256).
(nL+nH×256)
1(Default)
2
3
• a=202: Controls input buffer full Busy with the value selected by
(nL+nH×256) and controls Busy with output/cancel timing
(remaining capacity).
(nL+nH×256)
1(Default)
2
3
4
• XON/XOFF is also output by the establishment of conditions.
• Ignores the data received when input buffer idle capacity is 0.
• a=212: Selects DMA (Direct Memory Access) control of serial
communication specified by (nL+nH×256).
(nL+nH×256)
1
2(Default)
- 269 -
ACK Output Position
ACK-in-Busy
ACK-while-Busy
ACK-after-Busy
When Input Buffer
When Input Buffer
Capacity 4K Bytes (Large)
Capacity "Small" is Set
Output Cancel Output
16 26 128
16 40 128
30 50 72
30 60 72
DMA control
Invalid
Valid
is Set
Cancel
256
512
256
512