●MSW5-6:
Auto Back Feed (CT-S281 unique)
Selects the behavior of GS+FF (print and black mark/label ejection) command
[Outline]
ON (1) OPERATION:
OFF (0) OPERATION:
●MSW5-7:
Not defined [Fixed to OFF (0)]
●MSW5-8:
FAULT Output
[Outline]
Selects the condition of FAULT output
ON (1) OPERATION
OFF (0) OPERATION:
Auto Back Feed
After the cut, paper stay there and when printer receives next print data, the back
feeding paper to top of form is done.
Back feeding to top of form is done immediately after the cut.
FAULT Output
At PE or Error, FAULT is output.
At PE or PNE or Error, FAULT is output.
OFF(0)
After Cut
Before Print
OFF(0)
PE, PNE, Error
- 479 -
ON(1)
ON(1)
PE, Error