Storage Management - Interlogix RS-3230 Configuration Manual

7. Click Save to save changes.

Storage management

Use the storage management window to display the capacity, free space available, and
the working status of NAS hard drives and the SD card in the camera. These storage
devices can also be formatted in the
Before formatting the storage device, stop all recording. Reboot the camera after
formatting is complete, otherwise the device will not function properly.
If Overwrite is selected, the oldest files are overwritten when the storage becomes full.
To format the storage devices:
1. From the menu toolbar, click
Storage Management.
2. Select the check box next to the HDD No. of the hard drive to be formatted.
3. Define the quota percentage for snapshots and recordings by modifying the values
in the Percentage of Snapshot
4. Click Format. A formatting permissions window appears.
5. Click OK to start formatting the hard drive.
NAS settings
A network attached storage (NAS) device can be used to remotely store recordings.
To configure recording settings, ensure that one or more NAS disks are available within
the network and correctly configured to store the recorded files, log files, etc.
Notes:
• Up to eight NAS disks can be connected to a camera.
TruVision 81 Series IP Camera Configuration Manual
Storage Management
Configuration > Storage
and Percentage of Record
window.
> Storage Management
boxes.
>
45