2. Select the
Enable
3. Type the alarm name in the
4. Drag the mouse on time bar to set the arming schedule and click
finished.
Note:
All scheduled times are based on the 24-hour clock. Ensure that the correct
time zone and daylight saving time settings have been configured in
>
System
>
System
5. Click
Save
to save changes.
6. Click the
Linkage Method
occurs. Select one or more response methods for the system when an alarm is
triggered. See "Linkage methods" on page 31 for details.
7. Click
Save
to save changes.
Smart event
Intrusion detection
An area in the surveillance scene can be configured to detect when intrusion occurs. If
someone enters the area, a set of alarm actions can be triggered.
38
check box.
Alarm Name
Settings.
tab to specify the linkage method for when an event
box.
TruVision 81 Series IP Camera Configuration Manual
Save
when
Configuration