Introduction; Default Settings To Access The Camera; Temporary Wi-Fi Connection For Camera Installation - Interlogix RS-3230 Configuration Manual

Introduction

This is the user manual for the following TruVision
1080p IP Wi-Fi Desktop IR camera (2 MP):
 RS-3230/3231
• TVQ-8101
1080p IP Wi-Fi Bullet IR camera (2 MP):
 RS-3250/3251
• TVB-8101

Default settings to access the camera

Default credentials
The camera comes with a user account with administrative rights for configuring all
options on the camera. The user name is "admin" and the password is "1234." For
enhanced security, we highly recommend changing the default password during initial
setup.
Default network settings
The network settings are:
• IP address (in a network without a DHCP server): 192.168.1.70
• IP address (when using a temporary Wi-Fi connection for installation): 192.168.2.70
• Subnet mask: 255.255.255.0
• Gateway address: 192.168.1.1
Ports used:
Browser
RTSP: 554
HTTP: 80

Temporary Wi-Fi connection for camera installation

See the Installation Guide for instructions on using the temporary Wi-Fi connection for
setup (recommended method). Please note the following when using the temporary
Wi-Fi connection:
• The LED(s) on the camera blink slowly to indicate that the camera is in the default
setup mode and requires attention.
• The temporary Wi-Fi connection is disabled and setup is interrupted after
connecting an Ethernet cable to the camera. The camera LED(s) stop blinking and
the camera SSID is no longer broadcast.
2
®
TruVision Navigator
RTSP: 554
Server/client control port: 8000
IP camera models:
TruVision 81 Series IP Camera Configuration Manual