Network Settings - Interlogix RS-3230 Configuration Manual

Network settings

Accessing the camera through a network requires the definition of certain network
settings. Use the Network menu to define these settings.
Wi-Fi
Define Wi-Fi and WPS parameters in the Wi-Fi window.
Note: Follow the recommended camera installation instructions in the installation guide
before defining parameters.
To define the Wi-Fi parameters:
1. Click Configuration
2. Click Search to search the online wireless connections.
3. Click on a wireless connection in the list to select it.
4. Select Manage
5. Make a selection from the
WPA-personal, WPA-enterprise, WPA2-personal, or WPA2-enterprise).
6. Define encryption and authentication parameters based on the security mode
selected.
7. Click Save to save changes.
To define the WPS parameters:
1. Select the Enable WPS
methods:
Push button connection (PBC): Push the WPS button on the wireless router
device and the WPS indicator starts flashing. (The WPS settings may be different
according to device type. Refer to the wireless router's user manual for details).
14
> Network > Wi-Fi.
as the Network Mode.
Security Mode
check box and then select one of the following connection
drop-down list (Not-encrypted, WEP,
TruVision 81 Series IP Camera Configuration Manual