Kohler K-301 Installation Manual page 6

Spout Supply Tube
Spout
Supply
Shoulder
2. Install the Spout Supply Tube
NOTE: Leave the protective sleeve on the spout supply tube until
the spout installation.
Slide the brass washer from the bottom of the spout supply tube
over the threads until it reaches the spout supply shoulder.
Insert the spout supply tube through the mounting hole from the
top of the deck/bath rim.
The flat portion of the brass washer should face forward, and the
countersunk holes should face up. The spout supply tube will be
suspended by the brass washer.
Slide the plate (oriented with the tabs toward the deck) and
washer onto the spout supply tube from the bottom and thread
on the nut.
Tighten the nut.
Secure the plate to the rough deck with two wood screws.
113969-2-AC
Brass
Washer
Plate
Wood
Wood
Screw
Screw
Washer
Nut
6 Kohler Co.