Kohler K-301 Installation Manual page 10

3/4 inch high-flow deck/rim mount bath valve

Hide thumbs Also See for K-301:

Available languages

Spout Supply

Tube

Tee

Measure

Distance

6. Install the Tubing - Rough Deck Installations

Measure the distance from the bottom of the spout supply tube to

the top of the tee.

Add 1" (2.5 cm) to this measurement, and cut a piece of 1/2"

Nom. (5/8" O.D.) copper tubing to ﬁt into the supply tube and

tee port.

Back off the threaded collars as far as possible without removing

them.

Pivot the valve bodies enough to remove the tee and two pieces

of tubing.

NOTE: If the valve body holes are smaller than recommended, it

may be necessary to remove the entire valve body assembly.

Install the tubing into the tee.

Mate the copper tube from the tee with the spout supply tube.

Pivot the valve bodies onto the two pieces of copper tubing.

DO NOT solder at this time.

113969-2-AC

Sleeve

Rough

Deck

Mounting

Nut

Threaded

Collar

Spout Supply

Tube

Copper

Tee

Tube

Kohler Co.

Table of Contents