Invacare Rea Comfort Assembly Instructions Manual page 11

4. E
C
5.
E
C
6.
B
REA COMFORT
D
With push bar
Tools: Screwdriver
D
With push handles
Tools: Screwdriver
A
Tools: 19 mm fixed spanner
19 mm hylsnyckel
4. The brake handle is secured in position by
locating brake lever (C) under the push bar and
plate (D) above it. Then secure in position with
screws (E).
5. The brake handle is secured in position by
locating brake lever (C) under the push bar and
plate (D) above it. Then secure in position with
screws (E).
6. The new rear wheel can be mounted either
by using a Quick-Release axle or a fi xed axle.
Mount the fi xed axle by inserting the axle (B) into
the hub of the wheel and tightening it against the
rear wheel attachment with the nut (A)
Incorrect adjustments or use of the brake can
!
reduce the effectiveness of the brake.
11