Invacare Rea Comfort Assembly Instructions Manual page 29

Electric tilt function and electric
adjustment of the backrest angle
1.
2.
REA COMFORT
A
3
Tools: 6 mm Allen Key
2
Tools: 4 mm Allen Key
1. Adjustment of the L-shaped
backrest attachment
The backrest attachment (A) can be fi tted in a
choice of two positions depending on the seat
depth that you require. Loosen the screws (1)
2
and remove the washers (2).
Adjust the backrest attachment to the desired
position and secure into place using the washers
(2) and screws (1). Do not forget to fi t the frontal
screw through the stay plate (3).
1
1
2. Fitting the electric backrest stay
Fit the sleeve (3) through the hole in the backrest
attachment and fi t the washer (2) between the
backrest stay and the backrest attachment. Lock
into place by tightening the screw (1). Repeat for
3
the other side of the backrest stay.
29